Kit entirely Made in Italy composed of monoblock Ergal plates and cast iron drivers made from billet.Allows you to mount the disc brakes in place of the rear drums of the Suzuki Samurai and Sj of any year to improve braking and cancel the wear of the jaws.All the components follow precise specifications in order to guarantee minimum tolerances and maximum reliability, the use of noble and high quality materials, guarantees an incomparable resistance to both corrosion and abrasion.The monoblock plates made from solid Ergal and the cast iron drivers, also made from solid and not laser cut as in all the kits on the market, guarantee the maximum stiffness of the braking system and eliminate all types of vibrations or danger of breakage resulting from the assembly of the various components.This kit allows the assembly of the front discs of the Suzuki Samurai / Sj / Vitara and of the Suzuki Samurai / Sj / Vitara or Fiat Stilo and Lancia Libra calipers by purchasing the assembly kit.To use the original hand brake it is possible to mount the Fiat or Lancia calipers which are fitted with a housing for the handbrake cable or alternatively a hydraulic hand brake must be installed.To complete the kit, the brake hoses must also be purchased. The configuration of the tubes varies depending on the model of the vehicle, in general the Spanish models are recognizable by the chassis number starting with the letters VSE ... while the Japanese models are recognizable by the chassis number starting with the letters JSA .. .For correct operation, it is advisable to install a proportional valve to regulate braking or small diameter disks.
The kit consists of: 2 monoblock ergal plates for Suzuki brake caliper installation; 2 cast iron sprockets drawn from solid for the installation of brake discs; 1 complete hardware kit for assembly.
