The installation of repositioners makes it possible to raise the shock absorber connection by 40mm so as to adapt it to a spring rise or simply to give greater excursion. In addition to creating an additional pivot point, move the shock absorber away from the bridge and the spring in order to avoid interference between the spring and the shock absorber.
They are welded to the TIG for maximum strength as all the stresses of the shock are transferred via the repositioner.allows to raise the 25mm shock mounting to fit to a rise in the spring or just to give greater range, as well as creating an additional hub away the shock from the bridge and the spring to avoid interference between the spring and shock absorber, frequent phenomenon when you lift up vitara and do not replace the struts.
They are welded to the TIG to obtain the maximum resistance seen that all the cushion stresses are transferred through the repositioners.
