HM4X4
Cod. 0507
In Stock

Pair of rear radius arms Suzuki Jimny Caster -2.5° with jonny joint

€690.00
Add to cart

These reinforced rear radius arms, recommended for raised frames up to 7cm, replace without any modification the original struts of Suzuki Jimny, are the only ones to be galvanized and painted with epoxy powders, The attacks match the original attacks perfectly.

The bushing on the chassis has been replaced by a completely revised jonny joint spherical joint, built internally by HM4X4 and designed specifically for the suspension of the Jimny.

The jonny joint is free to rotate along its axis allowing the maximum excursion of the strut but is limited in the lateral rotation in order not to affect the stability on the road.

For all the Jimny



For the construction of the jonny joint C45 steel is used and sliding is guaranteed by two unprinted shells made from solid with a high quality semi-crystalline polymer, with high mechanical strength and very low coefficient of friction, the use of these materials makes it practically free of wear even with extreme uses and allowing precise movements and an excellent absorption of vibrations.

The caster angle has been corrected by 2.5 ° to compensate for the rear deck rotation caused by the raising kits, the caster correction allows the springs to work properly and prevents the shock absorbers collide with the bridge.
Log in to view the file