This set made entirely in Italy raises 8cm compared to the original trim and mounts without any modification on all Suzuki Jimny of any year and engine, includes all the accessories useful for the optimal functioning of the suspension even with heavy use
Ideal for those who want more comfort in daily use and greater mobility in off-road use, without sacrificing stability and safety on the highway.
This lift kit allows a maximum excursion over 90 cm.
The set-up is available with specific calibration for gasoline or diesel engine, if a winch or heavy-duty bumper with a weight of more than 20kg is installed, springs with a suitable load will be provided, in the drop down menus at the top you can the customized configuration of the structure, specifying the year of off-road construction.
The bushing on the frame has been replaced by a completely revisable jonny joint spherical joint, made internally by HM4X4 and designed specifically for the Jimny suspension.
The jonny joint is free to rotate along its axis allowing maximum excursion of the strut but is limited in lateral rotation to not affect the stability on the road.
The shock absorbers included in the kit have a body of 50mm and stem of 16mm, are of the bitubo type with internal return stop on rubber resistant up to 5000kg, can be reviewed and recalibrated according to your needs.
The springs included in the kit are of progressive type with variable pitch.
A spring with variable pitch during compression progressively hardens thus obtaining an extremely soft, comfortable and able to copy the ground but very stable on the road.
For this kit it is possible to choose the type of spring load:
- soft for use in off-road mode without rear load, you will have maximum off-road performance, excellent road stability but if you load the rear suspension drops significantly, incorrect use prematurely snerva;
- standard with calibration very similar to the original trim, excellent off-road performance and very stable on the road, ideal for the multi-purpose use of the vehicle.
The lift kit is composed of the following accessories:
- 4 springs variable pitch;
- 4 shock Æternus;
- kit aeronautical braided brake hoses stretched;
- elongated bump stop complete with a new rubber pad;
- pair of reinforced and adjustable panhard rods to adjust the centering of the bridges and improve driveability and the established road;
- pair spacers for transmission shafts;
- kit honeycomb polyurethane bushings high mobility;
- repositioners for panhard bar to correct the arc and improve driveability and established road;
- kit 4 struts elongated, with proper caster to correct the rotation of the axles caused by the rise, with jonny joint hub system.
For the installation of this trim, if you do not intend to remove the stabilizer bar, it is advisable to purchase our bar disconnection kit found in this section.
