This entirely made in Italy trim raises 5cm compared to the original design of the new Suzuki Jimny, and includes all the accessories useful for optimal suspension operation even with heavy duty use.
Ideal for those who want greater comfort in everyday use and greater mobility in off-road use, without sacrificing stability and safety in use on the highway.
If a heavy duty winch or bumper with a weight exceeding 20kg is fitted, the trim shall be equipped with springs with a suitable load, in the drop-down menus at the top you can make the custom configuration of the trim.
The shock absorbers included in the kit have a body 50mm and 16mm stem, have the mechanical end cushioned internal polyurethane resistant up to 5000kg, they can be reviewed and regenerated according to your needs.
In case it is necessary to customize the calibrations to meet particular needs (desert trips, competitions, towing trolleys, use prevalent on snow, etc.) We offer the first free personalized calibration within the first year of purchase.
The springs included in the kit are progressive type variable pitch.
A variable-pitch spring during compression progressively hardens to obtain an extremely soft, comfortable and able to copy the ground but very stable on the road.
For this kit it is possible to choose the type of spring load:
- soft for use in off-road mode without rear load, you will have maximum off-road performance, excellent road stability but if you load the rear suspension drops significantly, incorrect use prematurely snerva;
- standard with calibration very similar to the original trim, excellent off-road performance and very stable on the road, ideal for the multi-purpose use of the vehicle;
- reinforced with calibration especially at the rear most rigid to allow the loading of heavy weights or the towing of trolleys.
IMPORTANT. For the Asian markets and for England that have right-hand drive, we ask you to notify us when ordering in order to provide the right accessories for the lift kit for the different driving side.
The kit includes the following components:
- 4 variable pitch springs;
- 4 shock absorbers;
- a pair of reinforced and adjustable panhard bars that allow the position of the bridges to be millimetrically adjusted to improve stability and reduce tire wear;
- a kit of decentralized polyurethane bushings that correct the caster angle, improving steering response and therefore precision driving on the road, to be installed in the front control arms;
- a kit of extended brake hoses in aeronautical stainless steel/ tfe brakes with Sae J1401 certified polyurethane protection with fittings obtained from solid and ergal cable gland;
- an adjustable corrector for the headlights height;
- two pairs of elongated bump stop in ergal.
All components, with the exception of springs manufactured in Italy by a TUV certified company, are entirely manufactured in-house in a single production plant in order to reduce costs and have maximum control over quality at every stage of production, purchasing from HM4X4 you are sure to always buy at the right price!
