Suzuki Jimny 2018 steering damper Made with a 50 mm reinforced body and 16 mm increased stem, it is suitable for both use in demanding competitions and for road use, as it does not harden the steering.The steering damper for Jimny from 2018, 100% Made in Italy, is electrolytically galvanized to give it maximum resistance to corrosion and damage from atmospheric agents.It is filled with high-quality ROTHEN hydraulic oil resistant up to 200 °C, therefore ideal for both heavy use and desert raids, as it guarantees the maintenance of braking even in intense and prolonged use.The shock absorber can be revised and adjusted according to your needs. The overhaul is guaranteed at a cost of 40.00 euros for the entire life of the shock absorber.It can be overhauled to maintain the right efficiency for life and recalibrate in case of special needs that change over time, such as extremely large tires, replacement of bridges, etc.Technical specifications: Air Dried pressurization to improve calibration consistency even in extreme conditions. T.I.G. for maximum resistance and a refined aesthetic; double tube in mechanical steel internally lapped, painted with epoxy powders and phosphated to prevent corrosion, the external tube has a diameter of 50 mm and a thickness of 2 mm to withstand impacts, in case the body is dented the shock absorber will continue to function normally; 16 mm steel rod coated in hard chrome CrVI free with tolerance according to EN ISO 286-2 polyurethane bushings very resistant to deformation and wear, they are molded with 80 shore thermoplastic polyurethane specific for automotive use, resistant to grease, oil and fuel; sintered internal components for maximum wear-free calibration control; graphite teflon sealing band to improve suspension smoothness, compared to cast iron bands they are much quieter. double limit switch in polyurethane and steel to stop the extension stroke in a controlled way and not to burden the attachments to the frame and bridges; ROTHEN shock absorber oil designed specifically for off-road use with a high viscosity index that guarantees regular calibration up to 200 ° C, essential for intense use such as races or raids in the desert; double adjustment of rebound and compression settings, both at high and low speeds with preloaded travel reed valves with star springs in compression and helical spring in rebound; double seal with o-ring and oil seal with metal base, the high quality of the closure allows not to use the fork protectors that in the long run create accumulation of dirt and damage the shock absorber, any debris that settles on the stem is cleaned by the double lip of the metal oil seal; calibration on a 10-speed test bench, from 5 to 500 m / s to have perfect calibration in all conditions.
