High-quality spring for Coilover, made entirely in Italy.
It is manufactured from 52SiCrNi5 steel, according to EN 10089 1.7117, and has an internal diameter of 64mm.
This size is usually used for shock absorbers with a 2" (50mm) body.
The first and last coils are milled to match perfectly with the coilover rings.
The height of the unloaded spring is 400mm. From the drop-down menu you can choose the load of it with variations ranging from 100Lb/inch to 300Lb/inch.
In order to make the best choice for your needs consider that the 100lb/inch load corresponds to about 1.8 kg/mm i.e., the spring lowers one mm for every 1.8kg of applied load, more precisely:
- the spring with 100LB load sags 1mm for every 1.8kg;
- the spring with 150LB load lowers 1mm for every 2.7kg;
- the spring with 200LB load lowers 1mm every 3.6kg;
- the spring with 250LB load lowers 1mm every 4.5kg;
- the spring with 300LB load lowers 1mm every 5.4kg.
Normally springs are in stock but considering the very wide range if you want to be sure of actual availability or for advice on load selection please contact us.
