Drive shaft HD rear sliding 100mm for Suzuki Jimny from 2018, produced in Italy by a specialized company.When closed, it has the exact same length as the original shaft, but can extend up to 5 cm more than the original, and is therefore ideal for settings over + 5cm or in the case of elongated control arm.This particular shaft, designed to eliminate any vibration and any danger of breakage, is built by making the following improvements to the standard trees: sliding joint with greaser, larger diameter than the original; high quality forged flange, with elongation capacity up to 10 cm, which allows an inclination of the crosses up to 35°, ideal for raised structures, avoids the insertion of the extensions canceling any form of vibration; balancing at 2800 rpm; larger and normalized drive shaft cruises, therefore purchasable by each spare parts dealer, equipped with grease nipple, with a working angle of 10 ° greater than the original; tube with larger diameter, 60mm against 50mm of the original, carefully balanced to avoid any form of vibration; sliding up to 10 cm with metal protective fitting with protective o-ring, it allows to have sliding protection from damage caused by stones, sand and the like and protects the sliding from dirt.
