King Shocks coilover Polaris RZR-XP900
High-performance coilover for UTV Polaris RZR XP900 from King Shocks, made in the USA with severe testing directly on different types of terrain. It is available for both stock and long travel aftermarket suspension setups. Fully serviceable and adjustable.
For this side x side Polaris model you can choose through the menus above two different coilover models for both front and rear.
At the front, the choice falls on the diameter of the shock body between 2.0" and 2.5", while at the rear in addition to the diameter, the model with PiggyBack or Remote reservoir is available.
Whichever choice you make the proposed coilover is a monotube shock absorber, made of steel and subjected to galvanization. In the connections, the bushings are made of polyurethane. The Piggyback reservoir is attached directly to the coilover without the encumbrance of tubing that could creep into the wheel wells, the Remote reservoir, on the other hand, is connected through a very high quality tube. Both reservoir models ensure the separation of the gas from the shock absorber oil, so as to avoid the emulsion effect that temporarily inhibits the effectiveness of the shock absorber.
There is also a compression adjuster with 20 positions; you can switch from the softest to the stiffest with a simple turn.
Front coilover details 2.0":
- suitable for POLARIS RZR-XP900 2011/2022
- shock absorber body Ø 2.0"
- PiggyBack reservoir
- stroke 7.8"
- gas pressure 150,000 PSI
- length in rebound 23.3"
- length in compression 15.5"
- UTV 2/4 seats
Front 2.5" coilover details:
- suitable for POLARIS RZR-XP900 2011/2022
- shock absorber body Ø 2.5"
- PiggyBack tank
- stroke 7.89"
- gas pressure 150,000 PSI
- length in rebound 23.53"
- length in compression 15.64"
- UTV 2/4 seats
Rear 2.0" coilover details:
- suitable for POLARIS RZR-XP900 2011/2022
- shock absorber body Ø 2.0"
- PiggyBack reservoir
- stroke 8.05"
- gas pressure 150,000 PSI
- length in rebound 22.66"
- length in compression 14.61"
- UTV 2/4 seats
Rear 2.5" coilover details:
- suitable for POLARIS RZR-XP900 2011/2022
- shock absorber body Ø 2.5"
- reservoir Remote
- stroke 7.14"
- gas pressure 150,000 PSI
- length in rebound 23.03"
- length in compression 15.89"
- UTV 2/4 seats
