King Shocks coilover Polaris RZR-XP1000
High-performance coilover for UTV Polaris RZR XP1000 TURBO from King Shocks, made in the USA, subjected to severe testing directly on different types of terrain. It is available for both stock and long travel aftermarket suspension setups. Fully serviceable and adjustable.
For this UTV Polaris model you can choose through the menus above different models of coilovers at the rear depending on the year of construction
For the front, the proposed shock absorber is a 2.5" diameter monotube with IBP (internal bypass), compression adjuster and separate PiggyBack reservoir.
For the rear, the proposed models change depending on the year of construction, but basically all are monotube with IBP compression regulator and separate Hose Remote reservoir.
The IBP will allow you to experience the same damping performance that was once reserved for racing-inspired dual shock configurations. Perfect for those with limited space.
The compression adjuster has 20 adjustment positions from softest to stiffest.
The PiggyBack separate reservoir at the front is attached directly to the coilover body, with no wires that could crawl into the wheel well in tight spaces. The Remote separate reservoir at the rear is attached to the coilover body with a very high quality tube. Both reservoir models separate the gas from the shock absorber oil so there is no emulsion effect that temporarily inhibits damping effectiveness.
Front coilover details 2.5:
- suitable for POLARIS RZR-XP1000/TURBO 2014/2022
- shock absorber body Ø 2.5"
- PiggyBack reservoir
- stroke 8.3"
- gas pressure 200,000 PSI
- length in rebound 25.12"
- length in compression 16.8"
- UTV 2/4 seats
Rear coilover details 2.5:
- suitable for POLARIS RZR-XP1000/TURBO 2014/2016
- shock absorber body Ø 2.5"
- reservoir Remote
- stroke 12.3"
- gas pressure 200,000 PSI
- length in rebound 34.5"
- length in compression 22.19"
- UTV 2/4 seats
Rear coilover details 3.0:
- suitable for POLARIS RZR-XP1000/TURBO 2014/2022
- shock absorber body Ø 3.0"
- reservoir Remote
- stroke 11.8"
- gas pressure 200,000 PSI
- length in rebound 34.5"
- length in compression 22.69"
- UTV 2/4 seats
