King 2.0 Bypass Shock
HM4X4 is an official King Shocks dealer and service center.
King's bypass shocks technology is the culmination of refining the original design that dates back over a decade. Regardless of your suspension's needs, King can provide bypasses specific to their configuration to ensure complete control of high and low speed wobble. The quantity and location of the tubes are based on King's more than proven experience and various customizations on many classic or prototype off-road vehicles.
Bypass shocks for your off-road vehicle are a huge performance upgrade, provided they are configured correctly. With the correct shock body size, stroke length, bypass tube arrangement and tuning, they can be incredible for the most demanding off-road driving.
Bypass shocks work by allowing oil to flow through tubes around the shock's main piston. Each tube contains a check valve that allows oil to flow in only one direction. By stacking the bypass tubes around the body at different heights, the shock absorber has softer zones and stiffer zones. The stiffness of each zone is controlled by the diameter of the bypass tube and the opening of the check valve (external adjustment).
Bypasses are position sensitive; it is possible for the tubes to be positioned incorrectly, which can make the shock absorber too stiff and jarring, too soft and bouncy, or even non-adjustable.
Bypass shocks for your off-road vehicle are a huge performance upgrade, provided they are configured correctly. With the correct shock body size, stroke length, bypass tube arrangement and tuning, they can be incredible for the most demanding off-road driving.
Bypass shocks work by allowing oil to flow through tubes around the shock's main piston. Each tube contains a check valve that allows oil to flow in only one direction. By stacking the bypass tubes around the body at different heights, the shock absorber has softer zones and stiffer zones. The stiffness of each zone is controlled by the diameter of the bypass tube and the opening of the check valve (external adjustment).
The bypass tubes are position-sensitive; it is possible for the tubes to be positioned incorrectly, which can make the shock absorber too stiff and jarring, too soft and bouncy, or even non-adjustable.
The height position of the bypass tubes relative to the piston is very important for proper operation. For a 2-tube bypass shock absorber, there are mainly 3 zones where the shock absorber will be affected by the valve and compression tubes:
the Bump Zone is the zone where the shock absorber is close to full lowering and the piston has passed all the bypass tubes;
the Ride Zone is the zone where the vehicle will be at trim height and where it will move most of the time;
the Top Out Zone is when the shock absorber is fully extended and the piston has passed all the extension tubes.
Likewise, the performance of a bypass shock absorber is dictated by its tuning. Tuning in all shock absorbers refers to our ability to control the force of the shock absorber over a wide range of shaft speeds. For example, shock absorbers that do not run enough oil move poorly because oil flowing through a fixed bore increases forces exponentially. The same happens with bypasses when the internal valve is stiff and the tubes are too small. For this reason, it is important that the vehicle be equipped with the correct bypass damper, assuming a bypass damper is needed.
Bypass shocks have hard zones and soft zones. Without an adequate amount of upward travel, there is no room for each zone to do its job well and you can end up with shocks that are too soft or too stiff. Therefore, for suspensions with less than 5″ of maximum stroke, bypass shocks are not recommended.
Bypass shocks are designed for off-road performance. If you are looking for the best ride on the road and do not plan to do demanding off-road riding, bypass shocks may not be the best choice for you.
Bypass shocks can be ordered with different compression and rebound bypass tubes. In general, the more tubes, the more adjustable the shocks are.
2-tube bypass shocks
2-tube bypass shocks generally have one compression and one rebound tube. The rapid transition between the travel zone and the shock zone can be aggressive.
3-tube bypass shocks
Also called triple bypass shocks, these are by far the most common configuration. The extra compression tube helps make the compression zones smoother.
King 2.0 PR Series bypass shocks are ideal for tight spaces and smaller vehicles that need multiple zone adjustment for unparalleled damping control that only a bypass shock can provide. These bypass dampers feature a Piggyback reservoir and 2/3 external bypass tubes.
The integrated Piggyback type reservoirs are made of anodized 6063 aluminum alloy, are lightweight, dissipate heat quickly, and do not rust internally due to gas contamination because it is separated from the oil inside the shock absorber, thus the oil emulsion effect that temporarily inhibits the effectiveness of the shock absorber is not created. In this model, the gas canister is attached to the head of the shock absorber, avoiding having tubes running under the wheel arches with risk of contact with the tires.
As soon as your order is placed, one of our shock tune-up experts will review your shock specifications and contact you to finalize the order details.
All King shocks are available with standard or custom tuning. For custom tuning, one of our shock absorber experts will work with you to make sure your shocks are built perfectly for your car to provide the best balance of performance and ride quality.
We will also help you determine the best bypass tube arrangement and configuration for your vehicle. Our standard calibration is calculated to work well for most typical suspensions that use shocks of this size.
Features
- cadmium plated chrome body, precision bored and polished
- 7/8" shaft heat treated, hard chrome plated and micro polished
- precise, high-flow, low-profile adjustable bypass valves
- aircraft-grade billet aluminum components
- heat-treated 6061 aluminum alloy piston
- heat-treated stainless alloy valve shims
- teflon bronze composite wear band
- replaceable 1/2" Teflon-coated spherical bearings
- lightweight hard anodized aluminum reservoirs
- long-lasting urethane seals
- high-quality Parker pipe fittings
- fully serviceable
- manufactured in the United States
Shock absorber specifications
Below are shock absorber details for all standard size 2.0 bypass shocks:
- stroke 6" - length in compression 13" - length in extension 19"
- stroke 8" - length in compression 15" - length in extension 23"
- stroke 10" - length in compression 17.05" - length in extension 27.05"
- stroke 12" - length in compression 19.59" - length in extension 31.59"
- stroke 14" - length in compression 21.59" - length in rebound 35.59"
Compressed and extended shock lengths are measured from eye to eye. Some shock absorber options may change the dimensions.
By looking at the image below choose, through the menus at the top, how you want the ByPass tubes positioned:
In the first style the ByPass hoses are at the side of the reservoir, in the second style the hoses are in front of the reservoir.
OPTIONS
The Bypass King shock absorber can be accessorized according to your needs either when ordering or later with the following accessories:
Wide spacers: it is possible to choose the pin diameter and the width of attachment to the frame and axle;
External bump stop: it is possible to choose whether to insert a bumpstop made of rubber or polyurethane, higher and softer;
Rod end length: it is possible to install supports that connect the coilover stem to the bridge, 5 sizes over the standard;
Reservoir: it is possible to have the short finned reservoir to better dissipate heat.
From the menu above make the choices to have the ideal configuration to your needs, if you have doubts contact us.
