Kit consisting of two rear shock absorbers with attachments identical to the originals, which can be installed on all Jeep Wrangler TJ, which can be overhauled and re-calibrated.
The proposed shock absorber is a high pressure monotube type completely Made in Italy, you can select the desired length from the drop-down menus.
The HM4X4 monotube shock absorbers have the following characteristics:
- stem in ergal machined from solid;
- professional grade silicone valve;
- T.I.G. welding where necessary for maximum resistance and refined aesthetics;
- internally ground mechanical steel tube, with an external diameter of 52 mm and a thickness of 3 mm to resist shocks and guarantee the absence of twisting;
- electrolytic zinc plating with iridescent white finish and subsequent trivalent chromium-based passivation with surface hardness 80 HV;
- steel rod diam.20 mm coated in CrVI free hard chrome with tolerance according to EN ISO 286-2;
- polyurethane bushings highly resistant to deformation and wear, they are molded with 80 shore thermoplastic polyurethane specific for automotive use, resistant to grease, oil and fuel;
- sintered internal components for maximum wear-free calibration control;
- sealing band in graphited Teflon to improve the smoothness of the suspension;
- double bump stop in polyurethane and steel to stop the extension stroke in a controlled way and not weigh on the bindings;
- ROTHEN Fork oil with very high viscosity index (Viscosity DIN 51562 40°C:13) specifically designed for off-road use which guarantees regular calibration up to 200 °C which is essential for intense use such as races or raids in the desert;
- double adjustment of the rebound and compression calibration (double effect shock absorber), both at high and low speeds with translation reed valves;
- linear piston with reed valve and adjustable double bypass for maximum comfort at low speeds;
- high pressure pressurization with inert gas;
- calibration on test bench at 10 speeds, from 5 to 500 m/s to have the perfect calibration in all conditions.
The overhaul of the HM4X4 shock absorbers is guaranteed at a cost of 50 euros each for the entire life of the shock absorber.
Recalibration, upon request, within the first year of purchase, is carried out free of charge in order to adapt the shock absorbers to your needs.
