Jeep Wrangler rear upper control arms
Pair of adjustable upper rear control arms for Jeep Wrangler JK/JKU and JL/JLU.
Upper rear control arms for Jeep Wrangler JK/JKU and Jeep Wrangler JL/JLU are essential suspension components, responsible for adjusting the rear axle, maintaining proper suspension geometry and vehicle stability, especially in off-road situations.
Our HM4X4 control arms, totally made in Italy, are made of high-strength steel to offer high resistance to bending, impact and torsional stresses, essential for use in off-road conditions.
They have a tubular design, with 8mm thickness, to withstand high loads without deforming. The finish is galvanized to protect the control arms from rust and wear caused by harsh environmental conditions such as mud, moisture and salt.
The proposed control arms are adjustable, that is, they allow the length to be adjusted to maintain the correct suspension geometry after the installation of lift kits, maintaining stability and reducing tire wear. The length can be adjusted without removing the mounting bolt.
In the control arms you will find polyurethane bushings on one side, which provide better response during off-roading due to increased rigidity, and Johnny Joints on the other side, which improve suspension articulation, providing greater flexibility during off-roading and reducing bushing wear under heavy loads.
The installation of these control arms allows the rear axle to be properly aligned after the installation of a suspension raise kit.
